The Flex TS4-A and TS4-R are different generations of the same product. They both are add-on (retrofit) MLPE units that can be installed on a standard PV module, which can add functionality to alm...
See more
How do Tigo Optimizers Work?
Predictive IV
Predictive IV uses module behavior statistics in conjunction with Impedance Matching to predict the optimum settings for a module to generate its ma...
See more
The simple answer is: No.
The Fire Safety (TS4-F/2F) and Monitoring (TS4-O/S/M) groups of MLPEs use different communication architectures, and cannot be mixed on a system.
MLPE Group Distinction...
See more
The simple answer is: No...
For full NEC compliance, all modules in a structure-mounted system are required to have RSD functionality.
The Rapid Shut Down (RSD) feature of TS4-S and TS4-F functions...
See more
The TS4-A-X (TS4-A-F, TS4-A-O, etc) has removable module clips. Under the clips are two mounting holes that can be used with any fastener (screw, bolt, etc) for mounting the TS4-A-X to racking or ...
See more
Yes! See below for details. Many of our competitors do not allow this.
Connector Compatibility
Tigo recommends that PV connectors should always be matched from the same manufacturer. In other wo...
See more
Tigo optimizers do not require a separate electrical ground wire because their internal design is "floating," meaning the electronics operate relative to the solar module, not to earth ground.
...
See more
The TS4 solution is modular, meaning each module can be outfitted with a TS4 cover to fit the application. On a single string, you can mix and match certain combinations of TS4s. Tigo refers to the...
See more
The simple answer is: Not exactly...The TS4 Flex Monitoring Solution gathers data for the module that they are connected with. This means that any data received, will be specific to the module(s), ...
See more
Yes. Modules with TS4-R or TS4-A add-on units are compatible with other Tigo products and can share the same Cloud Connect and Gateway. The same design guidelines for TS4 integrated modules apply t...
See more
The TS4 monitoring (either TS4-M or TS4-R-M/TS4-A-M) is a passive unit to allow most accurate measurement of the PV module it's installed on. As result, if the unit's input requirements aren't met,...
See more