3 String mit 3 TAP?
Ich habe insgesamt 60 Module auf meinem Flachdach installiert. Jedes hat einen Tigo TS4-A-0 eingesetzt. Aufgeteilt sind die Module in drei String mit jeweils 20 Elementen. Ausrichtung Ost-West mit jeweils 15° Neigung.
Wechselrichter von Goodwe 29.9 ET, Anlagenleistung maximal 25 KWp.
Verwende ich nur einen TAP, was von der Entfernung möglich ist, werden dann alle Elemente optimal gesteuert? Oder ist es nicht sinnvoll in jeden String einen TAP einzusetzen um jeden String seperat zu optimieren und damit insgesamt eine höhere Ausbeute an Energie zu erreichen?
Vielen Dank für Eure Antwort.
Emstern
-------------------
English Translation
-------------------
I installed a total of 60 modules on my flat roof. Each used a Tigo TS4-A-0. The modules are divided into three strings with 20 elements each. Orientation east-west with a 15° inclination each.
Inverter from Goodwe 29.9 ET, system output maximum 25 KWp.
If I only use one TAP, which is possible from a distance, will all elements be optimally controlled? Or doesn't it make sense to use a TAP in each string to optimize each string separately and thus achieve a higher overall energy yield?
Thanks a lot for your answer.
Emstern
-
Hallo Uwe Dr. Morgenstern,
Vielen Dank für Ihre ausgezeichnete Frage!
Die Funkverteilung eines TAP ist eine omnidirektionale Blase. Wenn Sie ein flaches Dach ohne Hindernisse haben, ist der beste Standort für den TAP direkt in der Mitte der Anlage.
Hier sind einige großartige Ressourcen mit Illustrationen zu diesem Thema:
Wenn Sie Fragen haben oder ein wenig Hilfe benötigen, wenden Sie sich bitte an das Support-Team oder wenden Sie sich an das Tigo Sales Engineering-Team. Unsere hochqualifizierten Ingenieure sind immer bereit, Ihnen bei der Entwicklung des bestmöglichen Systems zu helfen.
-------------------
English Translation
-------------------Hello Uwe Dr. Morgenstern,
Thank you for your excellent question!
The radio distribution of a TAP is an omnidirectional bubble. If you have a flat top roof with no obstructions, the best location for the TAP is directly in the middle of the array.
Here are some great resources with illustrations on the subject:
If you have any questions or need a little help, please contact the Support Team or reach out to the Tigo Sales Engineering team. Our highly trained engineers are always ready to help you create the most successful system possible.
0
Please sign in to leave a comment.
Comments
1 comment