Discovery length?

giacomopelizzon

• June 08, 2021 14:03

Hello. How long does a new system Discovery take? 

0

• 

  Tanger Y.

  

  • June 08, 2021 22:42

  For smaller residential systems, units appear in about an hour but I've noticed on some of my larger systems it can take longer.  After a unit is discovered it will begin showing up on the Tigo SMART site (portal).

  0
• 

  Curtis Community Moderator

  

  • June 21, 2021 19:18

  The Discovery is only the process of updating the CCA with the system configuration. It usually takes 3-5 minutes, but if the WiFi signal is weak, it can take a little longer. 
  
  The Discovery is separate from the unit verification (which takes longer). Once the system configuration has been received, the CCA starts the process of verifying the in/out-bound communications for each individual unit on the system. This verification period takes several passes, and can be anywhere from an hour (for smaller systems), or up to 48 hours for large systems...
  
  The speed of verification depends on the size of the system, and time of day that the Discovery was initiated. It can also be affected by interference, distance from TAP, or rooftop obstacles that impede the line-of-sight for the RF signals. 

  0

Please sign in to leave a comment.