Scroll
Follow

Adjusting scan settings on Power-One inverters

 

 

To disable the power scan:

  1. Access the keypad on your PowerOne inverter and press the ESC button.
  2. Use the arrow keys to locate the Settings menu.
  3. Press ENTER to access the password entry display.
  4. Enter 0000 and press ENTER.
  5. Use the arrow keys to locate MPPTScan EN/DIS and press ENTER.
  6. Use the arrow keys to select Disable and press ENTER.

If the inverter does not allow the scan to be disabled, the following steps will extend the scan interval to its maximum value:

  1. Follow steps 1-4 as above.
  2. Use the arrow keys to locate Scan Interval and press ENTER.
  3. Use the arrow keys to increase the scan interval to its maximum value of 540 minutes (default is 15 minutes).
  4. Press ENTER to save settings.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk