Taking Control of Solar production for best efficiency

I may be totally off base, but I thought it worth the question.

I have 5kW of Panels, 5kW Sunsynk inverter and 15kWh Li Batteries. It is connected to "essentials" which are lights and plugs. My current usage (4 months data) is 935kWh and the system runs at around 35% efficiency with batteries fully charged at around 10am and low generation after that. Battery SOC is around 70% in the morning.

I am now looking at adding geysers to the mix, running them (I have 2) in the afternoons when usage is low and have purchased Wifi activated switches for the purpose.

I use the Sunsynk app to monitor usage and generation and the Tuya App to switch the geysers on and off.

The Question: Would the Tigo System allow the systems to connect and allow me to apply program logic to control the wifi switches when power is or is not available via the Solar or batteries.

If I am totally off base - I am sure someone will tell me.

Taking Control of Solar production for best efficiency

Sie haben nicht gefunden, wonach Sie suchten?

Kommentare