Shading

Kommentare

1 Kommentar

  • Avatar
    Greg Smith Community Moderator
    Early Adopter

    Hi Mick, thank you for asking this common question. Using an optimizer on just the shaded modules is what we refer to as partial deployment. You are optimizing only the modules shaded by your neighbor's chimney. I assume that you have about 14 or 16 modules in your array? I would put the TS4-A-S units on the unshaded modules so that you have complete module-level visibility for the system. You'll be able to see which modules are behaving properly, check on your energy production and power output, and a lot more. Regardless of the number of TS4's, you will need the Cloud Connect Advanced for the three TS4-O's you will use to mitigate the shading.

    Of course, you wouldn't need any module level devices if your neighbor would just move their chimney. Rude!

    0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.